ECO 2R DUST COLLECTION UNIT Page
The ECO 2R is a compact, ceiling mounted dust collecting unit that can be powered using its own fan or may be connected to
ducting for use in banks powered from a central point. It is intended for temporary airborne containment of fine powders during
processing, after which they may be returned to the end product or discharged to a container for disposal. Applications include
paint, toner or powdered dye blending, food and chemical blending.
The ECO 2R is a full featured cartridge dust collection unit with integral pulse cleaning. The dust collector hopper can be
configured to hold dust for discharge into containment units for disposal or may be configured to simply discharge back into
the device being ventilation. An example of this latter configuration is the temporary containment of fine powders during
processing, after which they are returned to the end product and not necessarily considered a waste product. For theses
applications, when the dust is dislodged from the cartridge filters during pulsing, it drops back down the capture inlet
duct and into the process container at the conclusion of mixing to minimize product loss.
The ECO 2R may also discharge captured contamination into appropriate waste containers during the pulse process. The reverse
pulsejet requires 90-110 Psig of clean compressed air.
The ECO 2R Dust Collection Unit is unique in that it can be powered individually using its own fan or may be connected to
ducting for use in banks of multiple units powered from a central point.
All type of standard filter cartridges may be used in the ECO 2R resulting in the high efficiency collection of any type of
air borne contamination right at the source.
This dust collection unit was designed to fit the requirements of companies that have limited manufacturing space.
You benefit by not having the unit occupy valuable floor space.
Construction and Details:
- Construction: 12 gauge sheet metal
- Overall Dimensions per unit: 43 high x 24 wide x 12 deep
- Inlet Duct Diameter: 8 to 12
- Exhaust Port Diameter: 8
- Quantity of Filter Cartridges per Unit: (2)
- Filter Media Description: (standard)
Type: 80/20 Poly Cell
Sq. Ft.: 50-Sq. Ft. per Filter Cartridge, Bottom
- Total Square Foot of Filter Area: 100
- Air Volume Rate: 1,000 CFM Max.
- Air to Cloth Ratio: 10 to 1
- Shipping Weight per Unit: 150-lbs.
NOTE: Certain options are available including alternative media filter cartridges, Control and isolation dampers,
integrated control panels (ICPs) for banks of multiple units.
5 YEAR WARRANTY AVAILABLE
For more information please call 1-800-999-0501
or contact us | 
